[Features]
The main ingredient is carbon fluoride combined with silicone.
GW-8000 is upgraded in non-stick ability.
Thin film, suitable for non-stick coating for precision rubber parts.
PFOA free and PFOS compliant with TSCA and RoHS standards.
Little change, no stick on the mold.
The product is not flammable.
[Applications]
Used for Releasing Mold for Plastic and Rubber.
[Methods of use]
(1) Dilution
‐ Use the agent straight or dilute with water appropriately, and agitate it until uniformly mixed.
(2) How to apply
‐ Before using the product for the first time, remove the old release agent completely. Use the steps in ‘(2) Cleaning the mold below to clean correctly.
‐ Apply a uniform coating film using an air spray device or rag.
‐ When spraying onto a mold, spray the mold release agent lightly with a few passes over the mold.
‐ It is more effective to apply a few thin coating films of low concentration of the agent than to apply a single thick coating film of high concentration.
‐ Be sure to use an appropriate amount of the agent since use of an excessive amount may result in mold contamination.
(3) Cleaning the mold
‐ Slight contamination of the mold release agent can usually be removed to a certain degree by wiping with a solvent (IPA, toluene, acetone).
‐ Alkaline cleaning agents are effective for complete removal. (Immerse in an approx.. 10% aqueous solution of potassium hydroxide or sodium hydroxide to which a small amount of surfactant has been added. The cleaning solution should be at a temperature of 60‐80℃).
[Specifications]
| Items |
Data |
| Appearance |
Milk white liquid |
| Specific gravity |
1.00 (25°C) |
| Solid component |
4 mass % |
| Principal solvent |
Water |
| Recommemmenđable dilution radio |
10-40 times |
| Fire Service Act |
Non-flammable |
| Recommendable diluting solvent |
Water (tap-water, ion-changed water) |
[Package]
15 kg/can.
For all of the information about Product and Quotation, please contact Qualiserv (Vietnam).
_-16-01-2023-17-52-12.jfif "Daifree GA-9700M")
Product review