Qualiserv (Group)
(0 review)
| Product ID: | GW-4010 |
| Brand: | Daikin Chemicals |
| Origin: | Nhật Bản |
| Manufacturer: | Daikin Chemicals |
| Packaging: | 15 kg/can |
| Warranty: | 12 months |
Daifree GW-4010 is a new water -based fluorocarbon mold release agent that does not contain silicone. It shows enhanced performance in comparison to Daikin’s previous product GW-250/GW-251 mainly for rubber materials. It also meets environmental regulations.
[Features]
Highly effective release performance with fluorocarbon as the principal ingredient. A thin, even film is produced, making it ideal for the release of precision components.
PFOA and PFOS free* and complies with environmental regulations such as TSCA and RoHS. *≦5ppb detection limit.
Little transfer, no stickiness left on the mold product.
Minimal mold contamination is produced, reducing mold -cleaning requirements and improving productivity.
[Applications]
Lubricating for plastic, rubber molds for electric, electronic items.
[Methods of Use]
(1) Dilution
‐ Use the agent straight or dilute with water appropriately, and agitate it until uniformly mixed.
(2) How to apply
‐ Before using the product for the first time, remove the old release agent completely. Use the steps in ‘(2) Cleaning the mold below to clean correctly.
‐ Apply a uniform coating film using an air spray device or rag.
‐ When spraying onto a mold, spray the mold release agent lightly with a few passes over the mold.
‐ It is more effective to apply a few thin coating films of low concentration of the agent than to apply a single thick coating film of high concentration.
‐ Be sure to use an appropriate amount of the agent since use of an excessive amount may result in mold contamination.
(3) Cleaning the mold
‐ Slight contamination of the mold release agent can usually be removed to a certain degree by wiping with a solvent (IPA, toluene, acetone).
‐ Alkaline cleaning agents are effective for complete removal. (Immerse in an approx.. 10% aqueous solution of potassium hydroxide or sodium hydroxide to which a small amount of surfactant has been added. The cleaning solution should be at a temperature of 60‐80℃).
[Specifications]
| Items | Data |
| Appearance | Milky white liquid |
| Specific gravity | 1.00 (25°C) |
| Solid component | 5% |
| Principal solvent | Water |
| Recommendable dilution radio | 5-10 times |
| Fire Service Act | Non-Flammable |
| Recommendable diluting solvent | Water (tap-water, ion-chaged water) |
[Package]
15 kg/can.
For all of the information about Product and Quotation, please contact Qualiserv (Vietnam).
_-16-01-2023-17-52-12.jfif "Daifree GA-9700M")
Product review