Qualiserv (Group)
(0 review)
| Product ID: | GF-700 |
| Brand: | Daikin Chemicals |
| Origin: | Nhật Bản |
| Manufacturer: | Daikin Chemicals |
| Packaging: | 13 kg |
| Warranty: | 12 months |
Daifree GF-700 Mold Release Agent is a silicone based fluorocarbon solvent based nonstick made by Maker Daikin in Japan. The product leaves less plaque on the mold, minimizes the formation of mold, the composition is suitable for rubber and plastic injection molding.
[Features]
Solvent containing Silione.
In accordance with the conditions of environmental protection.
Little transfer, no stickiness left on the mold product.
Minimal mold contamination is produced, reducing mold -cleaning requirements and improving productivity.
[Applications]
Used for releasing for plastic, and rubber molds.
[Methods of Use]
(1) Dilution
‐ Use the agent straight or dilute with recommendable solvent appropriately, and agitate it until uniformly mixed.
‐ Part of the ingredients may settle out when it is used under 15℃. In that case, gradually heat it up to around 25℃and agitate it before use.
(2) How to apply
‐ Before using the product for the first time, remove the old release agent completely. Use the steps in ‘(2) Cleaning the mold’ below to clean correctly.
‐ Apply a uniform coating film using an air spray device or rag.
‐ When spraying onto a mold, spray the mold release agent lightly with a few passes over the mold. ‐ It is more effective to apply a few thin coating films of low concentration of the agent than to apply a single thick coating film of high concentration.
‐ Be sure to use an appropriate amount of the agent since the use of an excessive amount may result in mold contamination.
(3) Cleaning the mold
‐ Slight contamination of the mold release agent can usually be removed to a certain degree by wiping with a solvent (IPA, toluene, acetone).
‐ Alkaline cleaning agents are effective for complete removal. (Immerse in an approx.. 10% aqueous solution of potassium hydroxide or sodium hydroxide to which a small amount of surfactant has been added. The cleaning solution should be at a temperature of 60‐80℃).
[Specifications]
| Items | Data |
| Apperarance | Clear liquid |
| Specific gravity | 0.74 (25°C) |
| Solid component | 3 mass % |
| Principal solvent | Butyl acetate Isooctane |
| Recommendable dilution radio | 1-10 times |
| Fire Service Act | Flammable |
| Recommendable diluting solvent | petroleum solvents |
[Package]
13 kg/can.
For all of the information about Product and Quotation, please contact Qualiserv (Vietnam).
_-16-01-2023-17-52-12.jfif "Daifree GA-9700M")
Product review