[Features]
Little transfer, no stickiness left on the mold product.
Minimal mold contamination is produced, reducing mold -cleaning requirements and improving productivity.
A degassing cap is provided so that the aerosol product can be discarded safely.
[Applications]
Used for releasing plastic and rubber molds.
[Methods of Use]
(1) How to apply
‐ Shake the can well, hold it about 20‐30cm away from the mold, and then spray lightly so that a thin uniform film is formed.
‐ Before using the product for the first time, remove the old release agent completely. Use the steps in ‘(2) Cleaning the mold’ below to clean correctly.
‐ Curing process; 150℃―180℃ × 30-10 min.
(2) Cleaning the mold
‐ Slight contamination of the mold release agent can usually be removed to a certain degree by wiping with a solvent (IPA, toluene, acetone).
‐ Alkaline cleaning agents are effective for complete removal. (Immerse in an approx.. 10% aqueous solution of potassium hydroxide or sodium hydroxide to which a small amount of surfactant has been added. The cleaning solution should be at a temperature of 60‐80℃)
[Specifications]
Items |
Data |
NET |
420ml |
Principal solvent |
IPA (isopropyl alcohol) |
Propellent |
LGP |
Fire Service Act |
Non-flammable |
[Package]
420ml/can.
For all of the inforamation about Product and Quoataion, please contact Qualiserv (Vietnam).
Product review